Learning Context

Learning Context, which is off by default, shows your iPhone's motion state, steps and distance on the Progress tab while you study.

iOS · Updated · Checked against app commit 2c3b65a

This feature is in beta. It may be limited to some users or still be tuned; the section on limits says what applies.

What it does

Learning Context reads your iPhone’s motion sensors while you study. A card at the top of the Progress tab shows the motion state the phone senses (stationary, walking, running, cycling or in a vehicle) with a confidence word, plus steps and distance counted since tracking started. The feature is off by default and needs the iOS Motion & Fitness permission. This version does not read heart rate, and no screen compares your study results across contexts. It is a beta.

How to use it

  1. Open the Progress tab. The Learning Context card is at the top and its status reads Off.
  2. Switch the card’s toggle on. The same switch is in Settings → Motion & Fitness → Learning Context.
  3. If iOS asks for Motion & Fitness access, allow it. The request text in the app reads: “Audiofirst uses Motion & Fitness data to estimate whether you are walking, running, or stationary, so it can compare study results across learning contexts.”
  4. Read the status line under the card title. While tracking runs it shows the motion state and a confidence word, for example “Walking · high”.
  5. Look at the steps and distance tiles. They show a dash until the phone reports a value. Distance appears in metres, or in kilometres from 1,000 m.
  6. Start a classic session from the Library tab and study as usual. Tracking starts with the session and stops when the session ends or is closed.
  7. Switch the toggle off to stop tracking. The status goes back to Off.

Settings that affect it

  • Settings → Motion & Fitness → Learning Context — turns the feature on or off. The same switch is on the card at the top of the Progress tab. Default: off.
  • The Motion & Fitness permission belongs to iOS, not to the app. When iOS reports it as denied or restricted, the card shows Permission denied.

Limits and honest caveats

  • Nothing is read until you switch the feature on. With the switch off, the app does not start motion tracking.
  • Only the iPhone’s own sensors are used. The heart tile always shows a dash, and the app contains no heart-rate reading. The card’s note says heart rate needs a Watch, AirPods, Beats or a Bluetooth monitor, and the Settings text says it requires a connected device “later”.
  • The Settings text and the iOS permission text say the readings are used to compare study results. No screen does that in this version, and the readings are not saved with your answers. The card shows only the current reading.
  • Steps and distance restart each time tracking starts, which happens when you switch the feature on, open the Progress tab while it is not running, or start a classic session. They are not a daily total.
  • Tracking is tied to the classic session. The Focus session and the Live Voice Tutor do not start it and do not send readings.
  • The app does not stop tracking when you leave the Progress tab. It stops when you switch the feature off or when a classic session ends or is closed.
  • With the feature on, each grade you give in a classic session, by tap or by voice, is sent as an analytics event to the app’s PostHog server (a product analytics service). The event carries the pack ID, the grade and the reading: motion state, confidence, steps, distance, and floors, pace and cadence when the phone reports them. The app has no Settings switch for analytics.
  • The motion words (Stationary, Walking, Running, Cycling, In vehicle, Unknown) and the confidence words are English in every interface language.
  • Learning Context does not change when a card comes back. The schedule uses only your grade.

FAQ

Why does the card say Permission denied?

iOS reports the Motion & Fitness permission for Audiofirst as denied or restricted. The card shows what iOS reports, and the in-app switch does not grant it.

Why do steps and distance show a dash?

The phone has not reported a value yet, or step counting is not available on the device. The counts also restart each time tracking starts.

Does it show my heart rate?

No. The heart tile always shows a dash in this version.

Does it change my review schedule or my cards?

No. The next review time depends on your grade only. See the spaced repetition page.

Is the motion data stored or sent anywhere?

The latest reading is kept in memory while the feature runs and is not saved with your answers. When you grade a card in a classic session with the switch on, the analytics event for that grade includes the reading.