Voice commands and speech recognition

In a hands-free classic session you grade cards and control playback by saying one of eight command words instead of tapping.

iOS · Updated · Checked against app commit 2c3b65a

What it does

In a hands-free classic session the microphone stays on and the app listens for eight command words. Again, Hard, Good and Easy grade the card. Reveal and Skip show the answer. Repeat reads the card again. Stop ends the session. The words are in the recognition language you choose in Settings, and the four grade buttons use the same language. The recogniser is Apple’s speech recognition built into iOS.

How to use it

  1. Open Settings → Speech Recognition and set Language to the language you will speak the commands in. A new install starts with Russian (ru-RU).
  2. Open the Library tab, tap a pack, then tap Review N Due Cards or Start Session.
  3. On Ready to practice?, switch on Hands-free mode. It is only offered in audio sessions.
  4. Tap Start Session and allow microphone and speech recognition access when asked.
  5. Listen to the card. In the top bar a green pulsing microphone means the app is listening, and a badge beside it shows the two-letter code of the recognition language.
  6. When the answer is shown, say Again, Hard, Good or Easy in your recognition language. A hint under the grade buttons lists the four words. The word flashes across the screen, and the card is graded and the next one loads.
  7. Say Reveal or Skip to show the answer, Repeat to hear the card again, or Stop to end the session.
  8. Wait until the app has stopped speaking before you talk. It does not hear commands while it speaks.
  9. Tap the microphone icon to switch listening off or on again.

Settings that affect it

  • Settings → Speech Recognition → Language — the language of the command words and of the labels on the grade buttons. The built-in default is Russian (ru-RU).
  • Ready to practice? → Hands-free mode — required. Off by default. Settings → Session → Hands-free by default turns it on for every audio session; that is off by default too.
  • Settings → Session → Speak grade aloud (again / good …) — after a voice grade the app says the grade word aloud. On by default.
  • Settings → Feedback → Command feedback — a vibration and a tone confirm each command. On by default. See the command feedback manual.
  • Ready to practice? → Say your answer — with this on, and in a Voice exam, the pack’s language is used for the commands and Settings → Speech Recognition → Language does not apply. See the voice answers manual.

Limits and honest caveats

  • Voice commands work in the classic audio session with Hands-free mode on. Visual Review and the Focus session have none.
  • The Language list shows only languages that have a full set of eight command words in the app’s language list and that your iPhone can recognise. The app’s language list has 32 languages in this version. Our server can publish a newer list, so the choices can change.
  • If the recognition language is not supported on your phone, a hands-free session shows a notice that voice control is not available in that language yet. Answer with the buttons.
  • If you refuse microphone or speech recognition access, the app shows Voice Commands Unavailable. Choose Continue Tap-Only to carry on by tapping, or Open Settings to allow access. In a Voice exam a refusal means the exam does not start.
  • For commands, the app does not force recognition onto the device. It leaves the choice to iOS, so iOS may use Apple’s speech service, which sends the audio to Apple and needs an internet connection. The in-app AI disclosure lists speech recognition among the features that run on your device. For spoken answers, a note on the start screen says whether recognition is on the device or through Apple’s speech service.
  • Commands are ignored while the app speaks, while a session is paused and while the grade word is read back. For about 4 seconds after the app stops speaking, words that match what it just said are treated as echo.
  • In a Voice exam, grade words are not accepted as grades and Stop ends the exam.

FAQ

Which words can I say?

Eight: Again, Hard, Good, Easy, Reveal, Skip, Repeat and Stop. In English these are the words themselves. Other languages have their own words, some with extra synonyms. The grade buttons show the four grade words for the chosen language.

Why are the grade words in Russian?

A new install starts with Russian as the recognition language, and the grade buttons use the same language. Choose yours under Settings → Speech Recognition → Language.

Does speech recognition need the internet?

It can. For commands the app leaves the choice to iOS, and where iOS uses Apple’s speech service the audio goes to Apple over the internet. For spoken answers the start-screen note tells you which applies for the pack’s language.

Why does the app not react when I speak?

Check that Hands-free mode is on, that the microphone icon is green, and that the session is not paused. The app also ignores speech while it is reading, and the chosen language must be supported on your phone.

Can I turn off the spoken grade word?

Yes. Switch off Settings → Session → Speak grade aloud (again / good …). The command is still recognised and the tone and vibration still play if Command feedback is on.